Side Mount Spigots connects product design with practical production. A good specification considers function, service life, manufacturability, finishing, and quality control from the beginning. This guide explains the product, its benefits and limitations, its relationship to investment casting, and the normal manufacturing route.

What Are Side Mount Spigots?

Side Mount Spigots are glass panel supports fixed to the side of a slab, beam, stair stringer, or fascia rather than the top surface. Typical applications include balconies, staircases, decks, terraces, and commercial frameless balustrades. The exact design changes with load, pressure, temperature, corrosion exposure, installation space, and applicable industry standards.

Common material choices include 304 or 316 stainless steel with structural anchors, glass gaskets, and optional cover plates. Engineers select the grade after reviewing strength, toughness, wear, corrosion, machinability, weldability, and total lifecycle cost. Clear drawings should identify critical dimensions, surface finish, inspection points, and any certification required by the customer.

What Are the Advantages of Side Mount Spigots?

The main advantages are maximizes usable floor area, hides much of the fixing system, supports modern lines, and keeps the deck surface clear. A well-designed product can combine several functions in one component, reduce assembly work, and provide stable performance under repeated operating conditions.

Manufacturing can be adapted to order volume and geometry. Casting is useful for integrated shapes, while CNC machining establishes accurate holes, threads, sealing faces, and mounting datums. Heat treatment and surface finishing can further improve strength, wear life, appearance, or environmental resistance. This combination gives OEM buyers flexibility without sacrificing verification of important features.

What Are the Disadvantages of Side Mount Spigots?

Important limitations include edge distance and substrate strength are critical, installation access can be difficult, and accurate vertical alignment is required. These concerns should be addressed before tooling begins because late drawing changes can increase cost and delay approval. Very small orders may also carry a higher unit price when dedicated patterns, dies, fixtures, or test procedures are necessary.

Quality is not automatic. Material chemistry, mold preparation, temperature, feeding, heat treatment, machining setup, and inspection all affect the result. Designers should avoid unnecessary tight tolerances and specify them only on functional features. A capable supplier will review risks, propose practical allowances, and agree on an inspection plan before production.

What Is the Difference Between Side Mount Spigots and Investment Casting?

Side mount spigots are a specific railing support arrangement; investment casting forms complex stainless support bodies, while CNC machining establishes accurate holes, slots, and mounting faces. Investment casting uses an expendable wax pattern surrounded by a ceramic shell. It is especially effective for complex metal shapes, fine details, smooth surfaces, and moderate part sizes.

The comparison should therefore focus on product requirements rather than assuming one method always wins. Investment casting may reduce machining and combine features, but sand casting, die casting, forging, fabrication, or direct CNC machining can be more economical for other sizes, alloys, or production volumes. Many finished products combine a cast blank with machining, polishing, coating, assembly, and functional testing.

How to Make Side Mount Spigots

Production normally begins with these engineering stages: check edge distances, loads, and structure; choose anchors, offset, and steel grade; design tooling and machining allowance. During this phase, the manufacturer checks draft, wall thickness, radii, shrinkage, machining stock, datum locations, and how the component will be inspected.

The main production stages are to cast the bodies; machine mounting holes and glass slots; polish, passivate, and assemble inserts. Process parameters must be recorded so repeat orders can maintain the same material and dimensional results. Any repair, heat treatment, or special finish should follow the approved drawing and specification.

Final operations are to mark, drill, fix, align, glaze, and load inspect. Depending on the product, inspection can include material analysis, dimensional measurement, visual examination, hardness testing, pressure or leak testing, dynamic balance, proof loading, and nondestructive testing. Parts are then cleaned, protected, marked, and packed to prevent damage in transportation.

Before an order is released, the customer and manufacturer should agree on drawing revision, annual quantity, sample approval, acceptable casting standards, inspection records, and delivery packaging. Supplying realistic service information is equally important. Pressure, temperature, chemicals, outdoor exposure, vibration, and expected loads can change the recommended alloy or manufacturing route. This review prevents avoidable redesign and creates a clear basis for quotation, first-article approval, and consistent repeat production.

Tousin Metal supports OEM product development from drawing review and material selection through casting, CNC machining, finishing, inspection, and delivery. Early technical communication helps customers control cost while obtaining side mount spigots suited to the intended application.